Point Blue : ATEX approved RTU (Remote Telemetry Unit)

A low cost, versatile, IECEx and ATEX approved RTU for use in harsh and hazardous environments.

  • ATEX and IECEx compliant (to Zone 0)
  • GSM, GPRS or 3G networks
  • Remote monitoring of up to 5 programmable sensors
  • Long term secure data retention
  • Intelligent alarm functionality
  • Dynamic data recording
  • Operational downtime minimised
  • Plug and play solution minimises site visits
  • Simple and Quick to install
  • Can also act as a Modbus master

Point Blue ATEX approved RTU overview

*

A low cost, versatile, IECEx and ATEX approved RTU for use in harsh and hazardous environments.

  • ATEX and IECEx compliant (to Zone 0)
  • GSM, GPRS or 3G networks
  • Remote monitoring of up to 5 programmable sensors
  • Long term secure data retention
  • Intelligent alarm functionality
  • Dynamic data recording
  • Operational downtime minimised
  • Plug and play solution minimises site visits
  • Simple and Quick to install
  • Can also act as a Modbus master

Point Blue ATEX approved RTU overview

  • Real time remote monitoring of up to 5 sensors
  • Software Configurable I/O; supports AI, CI and DI
  • Powers external current loop and active voltage sensors
  • Built-in quad band GSM/GPRS or 3G modem with auto switching internal and external antenna
  • Lithium battery with an expected life of 5+ years
  • IP68 enclosure is submersible to 4 meters for 4 days
  • Connects to Medina or DNP3 Masters (e.g. ClearSCADA)
  • Modbus master communicating over RS232 and RS485
  • Remote firmware upgrade
  • Remote configuration
  • Integral immersion sensor
  • Rich telemetry functionality including dynamic trending/logging and intelligent alarm reporting.
  • Flexible integrated installation bracket
  • Automatic external power source detection
  • Non IS variant available – Point Orange.
Analogue Inputs Up to 4 channelsType: Active Current, passive current, active voltage, passive voltage

Current range: 0-20mA

Voltage range: 0-2V

Input impedance: 1MΩ

Accuracy: ±0.5% (Max ±2%)

Absolute maximum ratings: ±5VDC

Resolution: 16-bits

Digital inputs Up to 5 channelsVolt free

32-bit counter support up to 100Hz

Power Internal Lithium battery packOptional external battery pack

Sensor power supply (12V DC, current loop or voltage)

Protocols MedinaDNP3 (Level 3)

Modbus master (RS232, RS485 full and half duplex)

Memory 4GB flash memory512kB static RAM
Comms Internal Quad band GSM/GPRS modemTri-band 3G option

Auto switching internal and external antenna

Local monitoring Ambient temperature sensor (± 1°C)Integrated submersion sensor

Battery, loop, and external supply voltages

Automatic external power source detection and switching

Remote management Remote firmware upgradeRemote configuration
Dimensions 156mm × 110mm × 112mm (excluding mating cables)0.6 Kg (fully assembled)
ATEX classificationIECEx classification Ex II 1G Ex ia IIB T4 GaIECEx BAS15.0027X

Baseefa15ATEX0045X

Mounting Pipe or Pole – cable ties through specially designed slots in the unit (no tools required)Flat Surface – plastic bracket that slides into rear of enclosure and secured using two mounting holes. (bracket not supplied as standard)

Wall – Unit hangs on two screws protruding from a wall (not suitable if unit is likely to be knocked or exposed to flooding)

Choose Your terms

Standard terms see below.
Special terms are available upon request.
Login to the Help centre to see your company’s specific terms.

Standard Warranty:

1 year manufacturers warranty from shipment date

Standard Delivery (for quantities below 10 units):

Europe: 7 days
Middle East: 14 days from shipment date from carrier
Australia: 21 days from shipment date from carrier
Rest of World: contact us

Note: Point Blue requires specialist certification, packing and freight services outside the UK

Request a Call Back